ETExpat Team Now
Guides › Contractors

Paying International Contractors: Seven Costly Mistakes and the Fix for Each

Most contractor guides stop at classification. The money leaks after that: FX spreads, missed withholding, VAT nobody self-assessed, IP you never owned and payments that bounce. Here's the fix for each.

Expat Team Now editorial team · November 2026 · 11 min read

Where contractor payments actually go wrong

Most companies set up a way to pay international contractors once, in a hurry, when they sign their first overseas developer or designer. Then they never look at it again. Classification gets the legal attention. The payment mechanics get none, and that's where the slow, recurring losses happen: a currency spread nobody priced, a withholding obligation in the payer's country that nobody checked, VAT that should have been self-assessed, or a codebase the company paid for but never legally owned.

None of these looks dramatic in a given month. Spread over 15 contractors in eight countries for three years, they add up to a five-figure cost or an audit finding. The seven mistakes below are common in companies with 10 to 200 people. Each comes with a fix, and most fixes need a policy decision plus a one-time cleanup of contractor records, not a new vendor.

Advertisement

One caveat applies throughout. Withholding, VAT and IP rules depend on where your company is established, where the contractor lives and where the work is done. What follows explains how these rules generally work. Before you set policy for a specific country pair, check it with a tax adviser or local counsel licensed there.

Mistake one: letting the bank set the exchange rate

The most expensive habit is paying in your home currency by wire and letting the contractor's bank do the conversion. The reverse is no better: paying in local currency through your own bank's standard FX desk. Either way, the cost arrives as a markup over the mid-market rate rather than a fee, so it never appears on an invoice and nobody owns it.

Contractor FX costs have three parts: the spread over mid-market, a fixed transfer fee, and intermediary or receiving-bank charges taken from the amount in transit. Here are typical 2026 market ranges. They vary widely by corridor, volume and contract, so confirm current pricing with each provider.

Payment routeTypical FX spreadOther common costsBest fit
Traditional bank wire (SWIFT)2% to 4%$15 to $50 sending fee, plus $10 to $30 in intermediary deductionsRare, high-value payments where the bank relationship matters
Specialist payment provider (Wise Business, Airwallex, Payoneer and similar)0.3% to 1.5%Small fixed fee; local payout rails in many corridorsCompanies paying contractors directly that want low cost
Contractor management platform (Deel, Remote, Oyster, Rippling and similar)Roughly 0.5% to 2.5% depending on payout methodOften about $30 to $50 per contractor per monthTeams that also want contracts, invoicing and document collection

A hypothetical example: a company pays a contractor in Brazil $8,000 a month. At a 2.5% effective spread that's $200 lost each month. At 0.6% it's $48. The $152 difference is about $1,800 a year for one contractor. Across 20 contractors at similar rates, the gap passes $36,000, more than many teams pay for the platform itself.

The fix: agree the contract currency up front. Paying in the contractor's local currency usually helps retention, because they aren't absorbing your currency volatility. Then pick a provider that shows the mid-market rate and its markup separately, and make one person in finance review the effective all-in rate every quarter.

Mistake two: assuming withholding tax never applies to foreign contractors

Many finance teams assume that if a contractor lives and works abroad, the paying company owes no tax. That's often true. It isn't safe to assume, and the answer depends mostly on your country, not the contractor's.

Withholding on foreign contractors comes up in a few common situations:

  • Payer countries that tax outbound service fees. India, Brazil, Mexico, Indonesia, the Philippines and several Middle Eastern and African jurisdictions can require withholding on certain payments to nonresidents, especially for technical, consulting or management services, even when the work happens offshore.
  • Payments classed as royalties. If the contract licenses software, content or IP rather than buying a service outright, many countries treat the payment as a royalty subject to withholding.
  • Work performed in the payer's country. A contractor who spends weeks on-site in your country can create a local tax liability, and you may be the one required to withhold.

Tax treaties often reduce or remove withholding, but only if you hold the paperwork. That usually means a tax residency certificate from the contractor's home tax authority, a treaty-benefit declaration, or a country-specific form. A US payer, for example, typically collects a W-8BEN. Other countries use their own declarations, and some require the payer to file a return or certificate before the money can leave.

The fix: for each country pair you pay, record whether withholding can apply, what rate the treaty allows, and which document supports that rate. Collect the documents before the first payment, log their expiry dates (residency certificates are often annual), and keep the register where auditors can review it.

Mistake three: ignoring the reverse charge on VAT and GST

When a business buys services from a supplier abroad, most VAT and GST systems shift the tax obligation to the buyer. This is the reverse charge. The contractor invoices without VAT and the buyer reports the tax in its own return. Usually the buyer reclaims the same amount in that return, so the cash cost is zero. Getting it wrong isn't free.

Reverse charge VAT works in broadly similar ways in the EU, the UK, Norway and Switzerland. Comparable mechanisms exist for GST in Australia, New Zealand, India and Singapore (where details depend on the buyer's registration status), and for VAT in the UAE, Saudi Arabia and other Gulf states. Three things go wrong in practice:

  • The buyer never records the reverse-charge entry, leaving a gap auditors find easily.
  • The buyer can't fully recover input tax. Financial services, healthcare and some education businesses often fall into this group, so the reverse charge becomes a real cost at the local rate, which commonly runs from about 5% to 25%, and nobody budgeted for it.
  • The contractor charges their own local VAT by mistake, and the buyer pays tax it can't recover.

Buyers in countries with no national VAT or GST are mostly outside this system, but their subsidiaries in the EU, UK or Gulf are not.

The fix: have your accountant confirm, entity by entity, whether the reverse charge applies to imported services and whether you can fully recover the tax. Then make sure every foreign contractor invoice carries your VAT or GST number and whatever reverse-charge wording your jurisdiction requires.

Mistake four: paying from invoices that won't survive an audit

A PDF that says "Services, March: $6,000" works as a payment request. As evidence for an expense deduction, a withholding position or a VAT return, it's weak. Invoices are where the earlier mistakes either hold together or fall apart, because the invoice is the document tax authorities ask for.

At minimum, a compliant contractor invoice generally needs:

  • The contractor's full legal name, address and tax ID in their country of residence
  • Your legal entity name, address and VAT or GST number where relevant
  • A unique sequential invoice number and the date of issue
  • A description of the services and the period covered, specific enough to tie back to the contract
  • Currency, amount, and either the tax charged or the reason none was charged (for example, a reverse-charge statement)
  • Payment details that match the bank details you've verified for that contractor

Some countries add their own requirements, such as e-invoicing formats, local-language descriptions or registered invoice series. Mexico, Brazil, India and a growing number of EU states have tightened these rules for domestic suppliers, which affects what your contractors there can issue.

The fix: put the required fields into a template, or use a platform that generates invoices from the contract record. Then reject non-conforming invoices before approval, not after payment.

Mistake five: paying in full before the IP is yours

In many countries, a company doesn't own work just because it paid for it. Without a written assignment, copyright in code, designs and content usually stays with the person who created it. Your company may hold only an implied license, and that's the kind of gap that surfaces in due diligence during a fundraise or acquisition.

Common law countries such as the UK, Australia, Canada and India generally allow a full written assignment. Some civil law systems are stricter. Germany and Austria don't allow copyright itself to be transferred, so contracts grant exclusive, broad usage rights instead. Moral rights can't be waived in many European and Latin American countries, though they can often be limited. Some jurisdictions also require the assignment to name the specific rights, media or territory to be enforceable.

The fix: use a contract template reviewed under the contractor's local law. Use present-tense assignment wording ("hereby assigns") rather than a promise to assign later, and cover work created before signing. Then make payment conditional on a signed contract being on file. Your payments team shouldn't be able to release a first payment to a contractor who hasn't signed.

Mistake six: having no process for failed or misdirected payments

International payments fail more often than domestic ones. The usual causes are a mistyped IBAN or account number, a name mismatch between the invoice and the bank account, missing purpose codes (required in some countries, India among them), sanctions-screening holds, or a receiving bank that rejects the currency. When a converted payment bounces back, it may be converted again at a second spread, so you can lose a few percent before the contractor has been paid at all.

Fraud is the bigger risk. Fake "I've changed banks" emails to accounts payable are a common attack on companies with remote contractors, and money sent to a fraudster's account is rarely recovered.

Failure typeTypical resolution timePrevention
Incorrect account detailsRoughly 3 to 10 business days to returnValidate IBAN or account format at onboarding; send a small test payment
Missing purpose code or referenceRoughly 2 to 7 business daysStore required codes in the contractor's payment profile
Compliance or sanctions holdSeveral days to several weeksScreen contractors at onboarding; keep the contract and invoice ready to send
Bank details changed by fraudsterOften unrecoverableConfirm any change by calling a number already on file, and hold payment until confirmed

The fix: write a one-page procedure covering test payments for new contractors, a call-back check for any bank detail change, a named owner for returned payments, and a rule that you absorb reconversion losses so the contractor isn't penalized for your error.

Mistake seven: choosing the payment setup on headline price alone

A $0 subscription with a 2.5% FX spread can cost more than a $49-per-contractor platform with a 0.6% spread. A low-cost transfer app that doesn't store tax forms, signed contracts or invoice history can leave you rebuilding records by hand during an audit.

Compare options on total annual cost and on what each one keeps on file:

  • All-in cost: subscription plus effective FX spread plus transfer fees, calculated on your actual payments by currency
  • Corridor coverage: local payout rails in the countries you pay, not just SWIFT
  • Document handling: collection and expiry tracking for residency certificates, tax forms and signed IP assignments
  • Invoice generation: templates with the required fields and reverse-charge wording
  • Controls: approval workflows, separation between whoever approves an invoice and whoever releases the payment, and an audit log of bank detail changes

As a rule of thumb, a company paying fewer than five contractors in two or three currencies does well with a specialist payment provider and a well-kept contract folder. Above roughly ten contractors, or once you're paying in five or more countries, a contractor management platform tends to earn its subscription through saved admin time and fewer missing documents.

A pre-payment gate to set up this quarter

The fixes above reduce to one control: no contractor gets a first payment until their file is complete. For each contractor, that file should hold:

  1. A signed contract with a present-tense IP assignment, reviewed for the contractor's country
  2. A withholding determination for the country pair, with the residency certificate or treaty form on file and its expiry date logged
  3. Confirmed VAT or GST treatment, with your tax number and reverse-charge wording on the invoice template
  4. Validated bank details, a confirmed test payment and a recorded call-back contact
  5. The agreed payment currency and an effective FX rate you've checked against mid-market

Start with the contractors you already pay. Pull your three largest payment corridors, work out last quarter's effective FX cost against the mid-market rate, and check each contractor file against the list. If more than a quarter of the files have gaps, or your all-in cost is above 1.5%, change your process or provider before the next payment cycle.

Quick answers

Should we pay international contractors in USD or in their local currency?

Local currency is usually better for the contractor and for retention, because they don't absorb exchange-rate swings. It also makes your cost vary with the exchange rate, so some companies set rates in local currency and review them once a year. Either way, put the currency in the contract and choose a payment route with a low, visible FX markup.

Do we need to withhold tax when paying a contractor who lives and works abroad?

Often not, but it depends on your company's country and what the payment is for. Countries such as India, Brazil, Mexico and Indonesia can require withholding on certain payments to nonresidents, including service fees and royalties, and treaty relief usually depends on holding a valid residency certificate or treaty form. Confirm the position for each country pair with a tax adviser before the first payment.

What happens if a foreign contractor charges us VAT when the reverse charge should apply?

Foreign VAT charged in error is often hard or impossible to reclaim through your own return, so it can become a cost unless the contractor corrects it. Ask for a credit note and a reissued invoice that includes your VAT or GST number and the reverse-charge wording. Then update your invoice template so it doesn't happen again, and check local rules with your accountant.

Written by the Expat Team Now editorial team. Prices, features and rules change often - confirm details with the vendor or a licensed professional before you decide.